Introduction
Welcome to another fun amigurumi creation from my hook to yours! Today I'm sharing this adorable little robot pattern that's guaranteed to steal hearts with its cute factor. Despite being a robot, this little fellow is anything but mechanical in charm - with its rounded edges, big expressive eyes, and huggable size, it manages to be both techy and utterly endearing. I've designed this pattern to be approachable for those with basic crochet skills, using simple shapes that come together into a characterful creation. The best part? You can customize the colors to make your robot unique! This little guy works up fairly quickly and makes a perfect gift for kids who love robots or adults who need a dose of whimsy on their desk. Let's get started on creating your new robotic friend!
Materials
Yarn:
- Yarn A: Worsted weight (4) Light Gray - 100 yards (main body color) (Suggested: Paintbox Yarns Simply Aran)
- Yarn B: Worsted weight (4) Bright Blue - 30 yards (accent color) (Suggested: Paintbox Yarns Simply Aran)
- Yarn C: Worsted weight (4) White - 15 yards (detail work) (Suggested: Paintbox Yarns Simply Aran)
- Yarn D: Worsted weight (4) Black - 10 yards (detail work) (Suggested: Paintbox Yarns Simply Aran)
Notions:
- Crochet hook size G/6 (4.0 mm)
- 12mm safety eyes (2)
- Polyester fiberfill stuffing (approximately 3 oz)
- Stitch markers
- Yarn needle
- Scissors
- Small amount of felt in red or pink (optional for mouth)
- Fabric glue (if using felt)
Skill Level & Techniques
Difficulty: Beginner to Intermediate
Techniques Required:
- Magic ring/adjustable ring
- Single crochet (sc)
- Increases (inc)
- Decreases (dec)
- Color changes
- Working in continuous rounds
- Sewing pieces together
Expected Time Commitment:
- Approximately 4-6 hours total
Abbreviations & Terms
- ch: chain
- sc: single crochet
- inc: increase (2 sc in same stitch)
- dec: invisible decrease (decrease over 2 stitches)
- st(s): stitch(es)
- rnd: round
- ( ): stitch count at end of round
- [ ]: repeat instructions between brackets
- BLO: back loops only
- FLO: front loops only
Pattern Instructions
Head/Body (worked as one piece with Yarn A - Light Gray)
Round 1: Start with a magic ring, 6 sc into the ring (6)
Round 2: Inc in each st around (12)
Round 3: [1 sc, inc] 6 times (18)
Round 4: [2 sc, inc] 6 times (24)
Round 5: [3 sc, inc] 6 times (30)
Round 6: [4 sc, inc] 6 times (36)
Round 7: [5 sc, inc] 6 times (42)
Round 8: [6 sc, inc] 6 times (48)
Round 9-16: Sc in each st around (48)
Round 17: [6 sc, dec] 6 times (42)
Round 18: [5, sc, dec] 6 times (36)
Round 19: [4 sc, dec] 6 times (30)
Round 20: [3 sc, dec] 6 times (24)
Add safety eyes between rounds 12 and 13, approximately 6-8 stitches apart. Begin stuffing the head firmly.
Round 21: [2 sc, dec] 6 times (18)
Round 22: Sc in each st around (18)
Change to Yarn B (Blue) for the body
Round 23: In BLO, sc in each st around (18)
Round 24: [1 sc, inc] 6 times (24)
Round 25: [3 sc, inc] 6 times (30)
Round 26-30: Sc in each st around (30)
Round 31: [3 sc, dec] 6 times (24)
Round 32: [2 sc, dec] 6 times (18)
Round 33: [1 sc, dec] 6 times (12)
Continue stuffing the body firmly
Round 34: Dec 6 times (6)
Fasten off, leaving a long tail. Use the tail to close the remaining hole by weaving through the front loops of the remaining 6 stitches and pulling tight.
Arms (make 2 with Yarn A - Light Gray)
Round 1: Start with a magic ring, 6 sc into the ring (6)
Round 2: Inc in each st around (12)
Round 3-4: Sc in each st around (12)
Change to Yarn B (Blue)
Round 5-10: Sc in each st around (12)
Round 11: [4 sc, dec] 2 times (10)
Round 12: [3 sc, dec] 2 times (8)
Stuff the arm lightly, more firmly at the top and less at the bottom
Round 13: Sc in each st around (8)
Round 14: Dec 4 times (4)
Fasten off, leaving a tail for sewing.
Legs (make 2 with Yarn B - Blue)
Round 1: Start with a magic ring, 6 sc into the ring (6)
Round 2: Inc in each st around (12)
Round 3: [1 sc, inc] 6 times (18)
Round 4-6: Sc in each st around (18)
Round 7: [4 sc, dec] 3 times (15)
Round 8: [3 sc, dec] 3 times (12)
Stuff the leg firmly
Round 9: [2 sc, dec] 3 times (9)
Round 10: [1 sc, dec] 3 times (6)
Fasten off, leaving a tail for sewing.
Antenna (with Yarn A - Light Gray)
Round 1: Start with a magic ring, 4 sc into the ring (4)
Round 2-4: Sc in each st around (4)
Change to Yarn B (Blue)
Round 5: Inc in each st around (8)
Round 6: Dec 4 times (4)
Fasten off, leaving a tail for sewing.
Control Panel (with Yarn C - White)
Row 1: Ch 7, starting in 2nd ch from hook, sc in each ch across (6)
Rows 2-6: Ch 1, turn, sc in each st across (6)
Fasten off, leaving a tail for sewing.
Assembly Instructions
-
Control Panel: Sew the white rectangle to the center front of the blue body section, between rounds 25-29.
-
Control Panel Details: Using Yarn D (Black), embroider small dots, dashes or simple shapes onto the white control panel to create "buttons" and "controls".
-
Arms: Sew the arms to either side of the body, attaching them at approximately rounds 24-25.
-
Legs: Sew the legs to the bottom of the body, positioning them slightly toward the front for stability.
-
Antenna: Sew the antenna to the top center of the head.
-
Face Details:
- The eyes should already be inserted between rounds 12-13.
- Using Yarn D (Black), embroider eyebrows above the eyes if desired.
- For the mouth, either embroider a simple smile with Yarn D (Black) or cut a small curved shape from red/pink felt and glue it below the eyes.
-
Optional Details:
- Add small embroidered details with Yarn C (White) to represent joints at the arms and legs.
- Embroider small rectangles or circles on the body to represent additional robot features.
Technical Tips
-
Tension: Maintain a tight tension throughout to avoid gaps in the fabric where stuffing might show through.
-
Stuffing Technique: Stuff the head and body firmly, especially around the neck area to provide stability. For the arms and legs, stuff them more firmly at the connection points and less so at the extremities.
-
Joining Components: When sewing pieces together, use the matching yarn color and a whip stitch. Pin pieces in place before sewing to ensure proper positioning.
-
Eyes Placement: Position the safety eyes carefully to give your robot the right expression. Moving them slightly closer together or farther apart can dramatically change the character's appearance.
-
Customization:
- Try different color combinations for a unique robot design.
- Add small embroidered details like hearts, stars, or geometric shapes to personalize your robot.
- Make a smaller or larger robot by changing yarn weight and hook size.
Conclusion & Care Instructions
The finished robot stands approximately 6-7 inches (15-18 cm) tall, making it a perfect desk companion or toy for gentle play. To care for your amigurumi robot, spot clean with a damp cloth as needed. If more thorough cleaning is required, hand wash gently in cold water with mild soap, squeeze out excess water without wringing, and lay flat to dry. Avoid machine washing or drying.
Display your robot on a shelf, desk, or give it as a gift to someone who appreciates cute, handmade treasures. This little robot brings a touch of whimsy to any space!
For more amigurumi patterns and crochet inspiration, visit my website at trendydecos.com.
Frequently Asked Questions
Q: My robot won't stand up on its own. What can I do? A: Make sure the bottom of the legs are flat and firmly stuffed. If your robot still tips over, try repositioning the legs slightly further apart during attachment, or add a bit more stuffing to the base of each leg for a sturdier foundation.
Q: Can I make my robot bigger or smaller? A: Yes! To resize your robot, simply change your yarn weight and corresponding hook size. For a larger robot, try bulky weight yarn with a 5.5-6mm hook. For a mini version, try sport weight yarn with a 3.0mm hook. Keep in mind that this will also affect the amount of yarn needed.
Q: What's the best way to attach the safety eyes? A: Insert your safety eyes between rounds 12-13 before you stuff the head. Once positioned, attach the backs and push firmly to secure. If you're making this for a very young child, consider embroidering the eyes instead for safety.
Q: I don't have safety eyes. What are my alternatives? A: You can embroider eyes using black yarn, crochet small circles in black, or use buttons (though these are not recommended for toys intended for small children).
Q: How do I get the control panel to lie flat against the body? A: Pin the panel in place before sewing, and use a tight whip stitch around all edges. You can also lightly steam block the panel before attaching it to help it maintain its shape.
Q: My color changes are visible. How can I make them neater? A: When changing colors, complete the last stitch of the old color until two loops remain on your hook. Then yarn over with the new color to pull through those loops. This creates a cleaner color change.
Q: What kind of details should I add to make my robot look more "robotic"? A: Consider adding small embroidered details like stitched "seam lines" at joints, tiny "buttons" or "dials" on the body, or even small fabric appliqués to represent panels and tech details. The simpler you keep these details, the more cute and less technical your robot will appear.
Q: The antenna keeps flopping over. How can I make it stand up? A: For a sturdier antenna, you can insert a pipe cleaner or piece of wire inside while crocheting. Alternatively, use a slightly smaller hook for the antenna portion to create a tighter, more stable fabric.
© Patricia Poltera - trendydecos.com
